PS8800 Low Odor Polyaspartic Toilet Waterproofing Chemicals

Fast Cure Toilet waterproofing PS8800.

1)DESCRIPTION

PS 8800 is solvent-free,two-component, hand-applied, Polyaspartic clear coating.

2)FIELDS OF APPLICATION

PS 8800 is used in kitchen, toilet, and shower room waterproofing applications.

3)FEATURES AND BENEFITS

• fully bonded to the tile surface
• low odor
• excellent anti-slip property
• cures fast, ready for use after 8-12 hours
• convenient application
• visible waterproofing

4)COLOUR

PS 8800 is a colorless clear coating

5)APPLICATION METHOD

(a) Surface preparation& Repair

Clean the tile surface, and get rid of the dust and grease.

(b) Brush the vertical surface

Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. The height of the vertical surface is recommended to be higher.

than 1.5m, coverage is 0.2 kg/m2- 0.3 kg/m2( thickness about 0.15mm-0.25mm)

Begin the process at the top of the wall and work down to the floor. Complete the walls first and then begin the process on the floor.

• Brush the flooring surface.

Mix component A and component B with the ratio of 1: 0.45, make it stirred thoroughly. Recommended coverage is 0.3 kg/m2-0.4 kg/m2( thickness about 0.2mm-0.3mm)

Using a natural-bristle brush, apply one coat covering all surface area evenly with a layer of PS 8800.

• Ready for use

Keep the room ventilatory for 8-12 hours; then, it’s open.

6)PROPERTIES

Learn polyaspartic knowledge: Polyaspartic FAQ