SHENZHEN FEIYANG PROTECH CORP.,LTD
Shenzhen Feiyang Protech Corp., Ltd. Polyaspartic Polyurea Materials Researcher and Manufacturer
Add to Cart
PROFILE
YD-5406 is a cashew phenol amine epoxy hardener with very good adhesion and greatly reduced strength building time. It can also have a good curing effect at a low temperature of 5℃ which is faster than traditional polyamide.
ADVANTAGES
Excellent adhesion.
Faster curing speed than polyamide.
APPLICATIONS
Bonding
Anti-corrosion
STORAGE
It should be sealed in its original packaging and stored in a dry place at a temperature range of 0-40°C (the temperature must not fall below 0°C). It should not be placed in direct sunlight.
INDEX
| Appearance | Brown red viscous liquid |
| Viscosity (25℃) | 2000-10000 |
| Amine value | 210±30 |
| Relative density (25℃) | 0.98 |
| Active Hydrogen Equivalent Weight (AHEW) | 190 |
| Grams of epoxy curing agent required for 100 grams of E-51 epoxy resin | 100 |
BASIC FEATURES
| Pot life (25°C, 100g): | 1.5-3h |
| Shore D Hardness 48h | ≥75D |
| Tinplate sheet adhesion ① | Level 0-1 |
Basic data is based on the E-51 epoxy resin (E-51 is bisphenol A type, with an epoxy equivalent of 180-190).
Note: ① The above data: 128 resin: curing agent: xylene mixed solvent (xylene 30% + anhydrous ethanol 30% + C3H6O 40%) = 100:100:100, 100μm wet film was prepared and cured at 80℃×1h, and the adhesion based hundred grid test.